mold making components, molders,

HOME PAGE

MOLDSTAR90 INFO

PRODUCTS

ARTICLES & NEWS

TECH SUPPORT

ORDERING

MSDS

CATALOG

MOTORSPORTS

MACHINING SERVICES

EQUIPMENT LIST

HARDNESS INFO

SITE INDEX

EMAIL US

TRACKING

EDM MATERIALS

 
N116 W18515 Morse Dr.
Germantown, WI 53022
Phone: (262) 255-6662 or
1-800-272-3031

Fax: (262) 255-3655
 

credit-card.gif (2215 bytes)

Performance Alloys®

 

 

...World Wide Distributor of Beryllium-Free Copper Alloys...
    Manufacturer of Standard & Custom Components

mold making components, molders, alloys

Site Updated Often! To ensure proper viewing please Refresh page &

MAKE SURE YOUR BROWSER IS SET TO UPDATE AT EACH VISIT

mold making components, molders, alloys

Text Box: MoldStar® Cu-TRODE™ EDM Electrode Material

Text Box: FEWER ELECTRODES NEEDED WITH Cu-TRODE™

 

 

 

 

 

 

 

 
Text Box: REASON 1     Pricing
Cu-TRODE™ is competitively priced with both Graphite & Tellurium Copper, and is 1/3 to 1/2 the price of Copper  impregnated  graphite.
REASON 2   Cleaner
Tired of dealing with Graphite dust from along with the Disposal of spent electrodes. Cu-TRODE™ is not messy, dusty or migratory like Graphite dust and the Cu-TRODE™ chips are worth money!

Text Box: REASON 3 Scrap Disposal
The Cu-TRODE™ chips and spent electrode can be sold as Number 2 copper to any recycler of non-ferrous metals.
REASON 4 Electrode Wear
With Cu-TRODE™, EDM electrode wear/consumption is reduced, in some case by as much as 60% when compared to graphite. 
REASON 5 Faster Burns
Typically EDM burn speeds Text Box: when compared to graphite are much faster with Cu-TRODE™ amounting to better machine utilization.  
REASON 6  Liquid Effect
With Cu-TRODE™ cutting fluids, coolants, dielectric fluids have NO adverse on the effect while making electrodes or re-machining.
REASON 7  Cutter Wear
Cu-TRODE™ does not present the cutting tool wear issues common when machining Graphite.
Text Box: Typically when EDMing either steel or copper alloy workpieces, fewer electrodes are needed when using Cu-TRODE™. The benefit of making fewer electrodes, both from raw material cost and reduced machining time makes Cu-TRODE™ the Text Box: more profitable choice. This is a result of reduced electrode wear during burning. With Cu-TRODE™, there is Less end wear and Less corner wear. FEWER ELECTRODES means fewer tool changes, meaning the machine is Text Box: burning rather than making tool changes. FEWER ELECTRODES also means fewer EDM holders commited to jobs. This all means cost savings to your business operations.

 

Text Box: WHY Cu-TRODE™?
LOWER COST
CLEANER TO MACHINE
SCRAP HAS VALUE
FEWER ELECTRODES TO MAKE
FASTER BURN RATES 
NO CONTAMINATION FROM CUTTING FLUIDS
NOT ABRASIVE TO CUTTING TOOLS LIKE GRAPHITE IS

 

 

SITE INDEX


If you are unable to use this site index Click Here .

Disclaimer

While the information contained is deemed reliable, no warranties are expressed or implied. For specific information regarding an application please call 1-800-272-3031 or e-mail us at sales@moldstar.com


 Copyright © 1998-2014 by Performance Alloys & Services, Inc
Web site hosted by APLUS Hosting
All Rights Reserved.